The latest industry news and exhibition information.
home / news / industry news / How to disinfect cosmetic packagingSpace environment indicators:
1. Micro-inspection data control standard After each plate is placed in the workshop for half an hour, the total number of plates shall not exceed 10cfu/ml.
2. The inspection frequency requires that the ingredients and filling workshops of hairdressing and skin care products are inspected 1-2 times a month, and the laboratory technicians take points evenly and place 10 flat plates in the workshop.
3. During the sampling process, the analyst will place a clean plate on the object to be tested, lift the plate cover and cover the plate halfway, and start to place it for half an hour. 10 plates are placed on the operating table, machine, and packaging material room of the workshop. , pure water bucket cover, etc. When retracting the flatbed, retract the flatbed cover over the flatbed in the order in which it was initially placed.
Pure water index:
1. Micro-inspection data control standard The total number of bacteria in pure water for production shall not exceed 10cfu/ml.
2. The frequency of inspection requires pure water to be used in all aspects of the production of hairdressing and skin care products, and the laboratory technicians or quality inspectors will sample micro-inspections 3 to 4 times a week.
3. During the sampling process, the sampling inspector first opened the outer packaging paper of the sampling bottle, put on disposable gloves, disinfected the gloves and the sampling steel spoon with 75% alcohol, sprayed 75% alcohol to disinfect the sampling environment, and opened the pure water bucket and sampling bottle. , Use a sterilized steel spoon to take water, fill the sampling bottle with 2/3 pure water, and cover the bottle cap immediately.